Choosing Your Wooden Flooring

When choosing your wooden flooring, there are several options available to wood flooring enthusiasts. Understanding the different types of wooden flooring and how they are installed will enable you to be sure you are choosing a product that will suit your home’s needs and style, as well as your budget.


Hardwood Flooring is a natural, solid-based flooring material that has a beautiful texture. Compared with other types of flooring, it does not have those smooth and even surfaces as opposed to vinyl or laminate flooring, where even tiles or stone flooring can feel cold and clammy to the touch, especially in the colder winter times.


There are many different types to choose from, one being oak, a hardwood often prized for its strong finish and grained appearance, or ash, which features a more rough texture, and is widely used for workshops and bathrooms where dust bunnies can be a problem. For a softer look in the home, solid pine can be the ideal choice, pine is a very cheap softwood that is used for stage, rail, and moldings as well as flooring, with a beautiful subtle finish and warm tones, but they can start to look cast-off in a room if not properly looked after.


Oak and pecan will stay in top-class condition for many years, giving you flooring that will look great no matter what style of home you live in. Workload won’t be an ongoing issue with a hardwood floor, and it is essential to understand wood rot can occur in such low moisture indoor environments. Regular cleaning and maintenance will ensure that your wooden floor will stay looking great.


Regular or light cleaning doesn’t always help with the white spots. Just like wood polish, the use of a broken powder on your wooden floor would not rub the spots out as the place where the wood meets the lifter will be left checklist, as the powder will heat up and rub, the spots will start to lose their color, which gives you a better grip when vacuuming. But only wearing shoe coverings will not remove dirt. If you make your solution with water and a cloth, and when the solution has dried, if possible, then use scotch bright or old steel wool against the grit before vacuuming. Then this will remove just as the unsuitable ground while leaving behind the dirt gathering dust and debris. 

General maintenance instructions: 

  1. Add a pre-inspection point oil. Pre-inspection point oils are used to create a slippery surface, especially for domestic use; you can choose which color you prefer depending on when your flooring was installed.
  2. Keep cleaning your wooden flooring quite often and clears out any grit or sand; this is pre-timed maintenance but leaves a sparkling surface. The addition of a pre-inspection solution will ensure that the wood finish will stay even, smooth and brilliant throughout the life of your wooden flooring. 
  3. Rust redeeming agents act as sweeteners; a bubbling solution is the best method to remove any rusty colors from your wood flooring. 
  4. Water will remove all stains, and the process of water blasting will again make these areas shinier and more lustrous. 
  5. Vacuum when the solution has dried to avoid scratches and dirt in the finish. 
  6. Choose the best broom for your staircase; buying a house broom is unnecessary when the wood is that bad; the solution will get into any cracks and help remove any clumps. 
  7. Why not use scotch bright but remember that because it is a primitive cleaning agent powerful, we can only use it to light a minor spot, then using Scotch Bright to remove these tiny particles is a terrible way to use it. 
  8. Painting and varnishing fluids will work on a beautiful wooden floor; few wood finishes are hard-wearing, oil and wax-based, and educated on the product, the brush should have a stiff bristle that can rub into the wood. 

Leave a Reply

Your email address will not be published.